Lubricating Oil Circulation Filter Element HC8904FKS39H

Jun 30, 2025

Leave a message

HC8904FKS39H filter element application:

HC8904FKS39H filter element is installed at the oil suction port of the pump:
A surface oil filter is generally installed on the oil suction line of the pump to filter out larger impurities and particles to protect the hydraulic pump. In addition, the filtering capacity of the oil filter should be more than twice the pump flow rate, and the pressure loss should be less than 0.02MPa.

.jpg.jpg

HC8904FKS39H filter element is installed on the outlet oil line of the pump:
The purpose of installing the oil filter here is to filter out pollutants that may invade valves and other components. Its filtration accuracy should be 10-15μm, and it can withstand the working pressure and impact pressure on the oil line, and the pressure drop should be less than 0.35MPa. At the same time, it should be installed

Regulate system EH oil filter element HP8314L39-3MVRegulate system EH oil filter element HP8314L39-3MV

HC8904FKS39H filter element  Performance indicators:
Medium: general hydraulic oil, phosphate ester hydraulic oil, emulsion, water-ethylene glycol
Material: glass fiber filter paper-BN, stainless steel woven mesh-W, wood pulp filter paper-P, stainless steel sintered mesh-V
Filter accuracy: 1μ ~ 100μ
Working pressure: 21bar-210bar
Working medium: general hydraulic oil, phosphate ester hydraulic oil, emulsion, water-ethylene glycol
Working temperature: -30℃~+110℃
Sealing material: fluorine rubber ring, nitrile rubber

 

Send Inquiry