Selecting The Right Filter Type
Oct 05, 2024
Leave a message
Suction filters are usually put in a tank to filter out any large items, such as bolts or rags that may have dropped in the reservoir. They are not generally used for filtering your fluid to the required ISO code.
Pressure filters come highly recommended because they are placed after your pump, so if the pump was to fail, all of the components downstream would still be protected. These filters must be rated for your system's running pressure and ISO code.
Return filters are important because they clean the oil before it returns to your hydraulic reservoir and therefore keep your reservoir clean and free from dirt particles. Return line filters are generally used in open-loop applications and should be rated at the ISO code that your system requires.
While all three filter types are generally not needed in the same system, it is important to have at least one pressure filter or one return line filter in every application to maintain the fluid cleanliness level that hydraulic components require.
Send Inquiry
